Prof. Dr Md Alamgir Hossain
Treasurer, BUFT
About
I joined BUFT as a Professor of Industrial Engineering in January 2023. In February 2023, I was appointed as Dean of the Faculty of Fashion Studies (FFS) at BUFT. Prior to BUFT, I held various academic leadership roles at Sonargaon University, where I served as a Professor, Dean, and Director of IQAC from June 2019 to January 2023. Earlier in my career, I contributed significantly to the Military Institute of Science and Technology (MIST), Mirpur, Dhaka, Bangladesh, where I spent over 13 years. During my tenure at MIST, I served as an Assistant Professor for six years and five months, followed by roles as Associate Professor for two years, and ultimately as Professor for three years and six months. I was promoted to the position of Professor on December 7, 2015. Before MIST, I began my academic journey as an Assistant Professor at Primeasia University, Dhaka, Bangladesh, where I taught for six months.
I born in Jashore, one of Bangladesh's oldest districts, on May 10, 1975. I achieved exceptional academic results in both my secondary and higher secondary education in 1990 and 1992, respectively. Following this, I earned my BSc in Mechanical Engineering degree from BUET, ranking 16th out of 120 graduates in 1999. Before pursuing higher education in Australia, I gained practical experience as a Sales and Commissioning Engineer at BTCL for one year. In 2001, I enrolled in a PhD program at Swinburne University, Hawthorn, Australia, completing my PhD in December 2005.
Throughout my career, I have authored over 40 articles published in national and international journals and conference proceedings. My expertise spans Computational Fluid Dynamics (CFD), Fluid Dynamics, Machine Design, and CAD modeling, contributing to my success as an academic and researcher. Despite opportunities abroad, I chose to return to Bangladesh to dedicate myself to advancing research and knowledge sharing in my homeland.
Teaching/Research Specialization
Specialization
- Applied Fluid Mechanics
- CFD
- Fluidics
- Applied Mechanics
- Life Fellow of Institute of Engineers, Dhaka, Bangladesh
- Member of American Society for Mechanical Engineers (ASME)
- Member of Engineers Australia
- Life Fellow of Global Institute of Science and Technology (GIST)
- Life Fellow of BSME
- Life Fellow of Bangladesh Engineers Club Ltd (BECL)
Publications
[1]. Particle Dispersion and Deposition in Multiphase Turbulent Flow. Author(s) Dr Md Alamgir Hossain Publisher: Lambert Publishing Ltd Dt Published: 2012-07-11
[2]. JOURNAL ARTICLE
[3]. Mohammad Din Al Amin, AMM Shamsul Alam, Md Alamgir Hossain; Molecular Dynamics Simulations of Copper Nanowires for Evaluating Mechanical Properties Under Different Loading and Ambient Conditions
[4]. Mohammad Din Al Amin, Mohammad Minhaz Uddin, Md Alamgir Hossain, Molecular dynamics simulation to evaluate flexural properties of Cu nanowires under different loading conditions, North American Academic Research, 2022, 5(9). IF 3/75
[5]. Adib Bin Rashid, Md Alamgir Hossain, Md Mostafa Hossain, Irfan Ahmed, Performance Analysis of Biodiesel Generated Continuously by Using Newly Developed PLC Processor, NUB Journal of Applied Science, vol 3 No. 1& 2, 2021
[6]. Munshi Muhammad Raihan, Afrina Khan Piya, Mirajul Mahmud Abir, Mohammad Alamgir Hossain. Effect of SBF on Cyclic Compression Behaviour of Porous Titanium Component for Implant Application. Industrial Engineering. Vol. 4, No. 2, 2020, pp. 50-54. doi: 10.11648/j.ie.20200402.14
[7]. Afrina Khan Piya, Munshi Muhammad Raihan, Md Alamgir Hossain. Effect of Osteoblasts Cell Adhesion Behavior on Biomaterial Surfaces by Atomic Force Microscope. Advances in Applied Sciences. Vol. 5, No. 1, 2020, pp. 1-10. doi: 10.11648/j.aas.20200501.11
[8]. ALAMGIR Hossain, RAHID Zaman, MIFTAUR Rahman, RAIHAN Masud, FARDAN Abdullah, Yeasin A. Bhuiyan, "Design and Kick Analysis of a Soccer Playing Robot", Applied Mechanics and Materials, Vols 541-542 (2014) pp 1087-1091 (@(2014) Trans Tech Publications, Switzerland); doi 10.4028/www.scientific.net/AMM.541-542.1087
[9]. Dr M A. Hossain, M I. Islam, S A. Ratul, MT U R. Erin, “Heat Transfer Co-efficient and Effectiveness for Water Using Spiral Coil Heat Exchanger: A Comprehensive Study ”, Global Engineering, Science and Technology Journal, Vol 1, Issue 1, 2013, pp 12-22
[10]. ALAMGIR Hossain, RAHID Zaman, MIFTAUR Rahman,RAIHAN Masud, FARDAN Abdullah,Yeasin A. Bhuiyan, "Design and Kick Analysis of a Soccer Playing Robot", Applied Mechanics and Materials, Vols 541-542 (2014) pp 1087-1091 doi 10.4028/www.scientific.net/AMM.541-542.1087
[11]. Md. Almostasim Mahmud, Dr. Md. Alamgir Hossain, M. A. Muktadir, "Design Optimization and Installation of the Evaporative Cooler in the Perspective of Bangladesh" International Journal of Emerging Technology and Advanced Engineering, Vol 2, Issue 11, 2012, pp 741-749.
[12]. Md A. Hossain, Shabab M. Chowdhury, Yamin Rekhu, Khandakar S. Faraz, Monzur Ul Islam “Biodiesel from Coconut Oil: A Renewable Alternative Fuel for Diesel Engine”, Journal of World Academy of Science, Engineering and Technology, Vol 68, pp 1289, 2012
[13]. Hossain, A., and Naser, “CFD Investigation of Particle Deposition in a Horizontal Looped Turbulent Pipe Flow.” Journal of Environmental Modeling and Assessment, Springer, DOI: 10.1007/s10666-011-9252-8, Vol 16, No 3, 2011
[14]. Hossain, A., Naser, J., and Imteaz, M. "Extension of Analytical Turbulent Diffusion Model for Particle Dispersion and Deposition in a Horizontal Pipe Flow: Comparison with CFD Simulation." Journal of Environmental Modeling and Assessment, Springer, DOI: 10.1007/s10666-010-9248-9, Vol 16, No 4, 2011
[15]. Hossain, A., Hasan, F., and Seraz, AFMT., “Development of Design and Manufacturing of a Fixed Wing Radio Controlled Micro Air Vehicle (MAV)”. MIST Journal, Vol 3, No 3, 2011
[16]. Hossain, A; Naser, J; Imteaz, M “CFD Investigation of Turbidity Spikes for Different Velocity and Particle Load Profiles in a Horizontal Pipe.” Australian Journal of Water Resources, Vol. 14, No. 1, 2010: pp 63-73
[17]. Hossain, A., and Naser, “CFD investigation of particle deposition in a turbulent flow through horizontal pipe loop with 4 bends.” Journal of Engineering Science, Vol 1, pp 61-73, 2010
[18]. Hossain, A., and Naser, J. “Analytical and CFD investigation of turbulent diffusion model for particle dispersion and deposition in horizontal pipe flow.” Journal of Mechanical Engineering, Vol 41, Issue 1, 2009
[19]. CONFERENCE PROCEEDINGS
[20]. Dr Md Alamgir Hossain, Rasel A Sultan, Raian Nur Islam, Satya Brata Das, Sharodia Majumder, M A Rahman, “A Comprehensive Study on Multiphase Flow Through Annular Pipe using CFD Approach”, 12th International Conference on Mechanical Engineering (ICME 2017) December 2017, BUET, Dhaka, Bangladesh, Vol: AIP Conference Proceedings 1980, 040025 (2018); DOI: 10.1063/1.5044335
[21]. Md. Alamgir Hossain, Fariha Rahman, Maliha Mamun, Sadia Naznin, and Adib Bin Rashid, “Comparative analysis of emission characteristics and noise test of an I.C. engine using different biodiesel blends”, Vol: AIP Conference Proceedings 1919, 020010 (2017); https://doi.org/10.1063/1.5018528
[22]. Aziz Rahman, Al Amin, Alamgir Hossain, Brian Fleck, “Numerical Investigation of Two-Phase Nozzle Flow”, Proceedings of 10th International Conference on Mechanical Engineering, ICME 2013, 20-21 June 2014, BUET, Dhaka, DOI: 10.13140/2.1.4860.0964
[23]. M. A. Hossain, M. L. Rahman, S. M. Chowdhury, M. Shahriyar, and K. Shahnawaz, “Analysis of Extension the Sun-Ray Travel Path and Developed a Solar Container to Disinfect Flood Water by Solar Heat”, Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2013 (ICMERE2013) 1-3 May 2014, Chittagong, Bangladesh, ICMERE-2013-PI-114, DOI: 10.13140/2.1.3025.0881
[24]. Alamgir Hossain, Aziz Rahman, Rahid Zaman, Miftahur Rahman, Raihan Masud, Md. Mizanur Rahman Mizan, Yasin Arafat, Fardan Abdullah, "Development of an Integrated Vision System to Control a Soccer Playing Humanoid Robot", Proceedings of 4th Global Engineering, Science and Technology Conference 27-28 December, 2013, BIAM Foundation, Dhaka, Bangladesh ISBN: 978-1-922069-43-6
[25]. Alamgir Hossain, Aziz Rahman, Rahid Zaman, Miftahur Rahman, Raihan Masud, Md. Mizanur Rahman Mizan, Yasin Arafat, Fardan Abdullah, "Development of an Integrated Vision System to Control a Soccer Playing Humanoid Robot", Proceedings of 4th Global Engineering, Science and Technology Conference 27-28 December, 2013, BIAM Foundation, Dhaka, Bangladesh ISBN: 978-1-922069-43-6
[26]. Dr M A. Hossain, M I. Islam, S A. Ratul, MT U R. Erin, “Comprehensive Study on Heat Transfer Co-efficient and Effectiveness for Water Using Spiral Coil Heat Exchanger”, Proceedings of Global Engineering, Science and Technology Conference, 28-29 December 2012, Dhaka, Bangladesh. (RECEIVED BEST PAPER AWARD)
[27]. A. Hossain, Shabab M. Chowdhury, Monzur Ul Islam and H M Alamin, “Analysis of Exhaust Gas Emissions in a Diesel Engine Operating with Diesel and Biodiesel Blends", Proceedings of the 6th International Mechanical Engineering Conference & 14th Annual Paper Meet (6 IMEC&14 APM) 28-29 September 2012, Dhaka, Bangladesh.
[28]. M A Hossain, M Shahriyar, K Shahnawaz, N Ahmed; “Design and Manufacturing of a Solar Container to Disinfect Water for Flood Affected People”, Proceedings of the 6th International Mechanical Engineering Conference & 14th Annual Paper Meet (6IMEC&14APM), 28-29 September 2012, Dhaka, Bangladesh.
[29]. M A. Hossain, S M. Chowdhury, M U. Islam, H M Alamin; “Analysis of Exhaust Gas Emissions in a Diesel Engine Operating with Diesel and Biodiesel Blends”, Proceedings of the 6th International Mechanical Engineering Conference & 14th Annual Paper Meet (6IMEC&14APM), 28-29 September 2012, Dhaka, Bangladesh
[30]. Hossain, A., Chowdhury N. A., Linda R I, Akhtar S., “Design and manufacturing of a stair climbing vehicle”, Proceedings of International Conference on Industrial Engineering and Operations Management, Dhaka, Bangladesh, January 9 – 10, 2010
[31]. Hossain, A., and Naser, J. “CFD Analysis of Turbidity Spikes Movement for Unsteady Turbulent Flow in a Horizontal Pipe.” 4th BSME-ASME Int Conf on Thermal Engineering, Dec 2008, IUT, Dhaka
[32]. Hossain, A., “CFD investigation of blood flow in human portal vein with and without thrombosis.” A short course on “Biomedical Instrumentation” DCE, BUET, 3-7 May 2008
[33]. Hossain, A., Jamal Naser, A. M. K. McManus, and Greg Ryan. "CFD Investigation of Particle Deposition and Dispersion in a Horizontal Pipe." Third International Conference on CFD in the Minerals and Process Industries, Melbourne, Australia, 2003
[34]. Petkova, S., Alamgir Hossain, Jamal Naser, and E. Palombo. "CFD modelling of blood flow in portal vein hypertension with and without thrombosis." Third International Conference on CFD in the Minerals and Process Industries, CSIRO, Melbourne, Autralia, 2003.
[35]. Hossain, A., and Jamal Naser. "CFD Investigation of Particle Deposition around Bends in a Turbulent Flow." Proceedings of the Fifteenth Australasian Fluid Mechanics Conference. Sydney, NSW 2006, Australia, 2004.
[36]. Uttam Kumar Chakrabarti, Hossain, A., Nasim Shahriar, and Md. Ehsan. "Development of a Mechanism for Mixing Two Different Gases at Constant Proportion for Variable Flow Rates. "Proceedings of the 6th Annual Paper Meet and International Conference” Institute of Engineers, Dhaka, Bangladesh, 2000.