Faculty Member's Profile

Dr. A H M Abdul Moudood
Get in Touch


Dr. A H M Abdul Moudood

Assistant Professor & Head, BUFT


About

     Dr A H M Abdul Moudood has been working as an Assistant Professor at BUFT since January 2023. He earned his PhD in Engineering from Griffith University, Australia in 2019. He was a PhD research fellow under the International Postgraduate Research Scholarship (IPRS) at Griffith University. His doctoral thesis focuses on the environmental effects on the performance of natural fibre-based bio-composites. Prior to that, he pursued his MSc (by research) in Manufacturing Engineering from International Islamic University Malaysia (IIUM). He was a Research Assistant at IIUM under eScience (Project No. 03-01-08-SF0135), Ministry of Science, Technology and Innovation (MOSTI), Malaysia. As a post-graduate researcher he did research on Electrical Discharge Machining (EDM) of non-conductive ceramics (alumina and zirconia).  Dr Moudood is a BSc in Mechanical Engineering graduate from RUET, Rajshahi, Bangladesh. In addition, he has also completed an MBA (Accounting and Finance) from the University of Rajshahi. Dr Moudood has teaching experience at IIUM and Griffith University in both undergraduate and post-graduate levels. He was the recipient of an outstanding teaching award for his contribution to teaching during Trimester 2, 2019 at Griffith University, Gold Coast, Australia. Before joining BUFT, Dr Moudood was working as a Quality Control Officer at Tritium Ltd, Murarrie, Brisbane, Australia. He also has several years of industrial experience in Bangladesh. 

     Dr Moudood has published a number of articles in different high impact peer-reviewed journals. Furthermore, he has also presented his research results at different international conferences. He was awarded a publication assistance scholarship at Griffith University in 2019 and a silver medal for poster presentation at the engineering research and innovation exhibition at IIUM in 2014. He is an invited reviewer of many refereed journals, including Journal of Composite Materials, Advances in Materials Science and Engineering, etc. He is a member of Engineers Australia, the Institution of Engineers Bangladesh (IEB) and the Bangladesh Computer Society. 

Teaching/Research Specialization

      His research interests include natural fibre composites, non-conventional machining (EDM and micro-EDM), TQM, renewable energy, etc.

Currently, Dr Moudood is teaching the following subjects:
1. Elements of Mechanical Engineering
2. Mechanics of Materials
3. Elements of Mechanical Engineering Lab
4. Workshop Practice

Publications

[1]. Abdul Moudood, Anisur Rahman, Andreas Öchsner, Mainul Islam and Gaston Francucci, “Flax fiber and its composites: An overview of water and moisture absorption impact on their performance”, Journal of Reinforced Plastics and Composites, vol. 38(7), pp. 323–339 (2019). (IF = 3.710), Q1, DOI: 10.1080/15440478.2017.1414651

[2]. Abdul Moudood, Wayne Hall, Andreas Öchsner, Huaizhong Li, Anisur Rahman, and Gaston Francucci, “Effect of Moisture in Flax Fibres on the Quality of their Composites”, Journal of Natural Fibers, vol. 16 (90), pp. 209-224 (2019). (IF = 3.507), Q1, DOI: 10.1080/15440478.2017.1414651.

[3]. Huaizhong Li, Abdul Moudood, Wayne Hall, Gaston Francucci and Andreas Öchsner “On the Dynamic Performance of Flax Fibre Composite Beams Manufactured at Different Relative Humidity Levels”, Journal of Natural Fibers, vol. 17 (4), pp. 598-608 (2020). (IF = 3.507), Q1, DOI: 10.1080/15440478.2018.1507864.

[4]. Abdul Moudood, Anisur Rahman, Hossein Mohammad Khanlou, Wayne Hall, Andreas Öchsner, and Gaston Francucci, “Environmental effects on the durability and the mechanical performance of flax fiber/bio-epoxy composites”, Composites Part B: Engineering, vol. 171, pp. 284-293 (2019). (IF = 11.322), Q1, DOI: 10.1016/j.compositesb.2019.05.032.

[5]. Abdul Moudood, Anisur Rahman, Nayeem Md Lutful Huq, Andreas Öchsner, Mainul Islam and Gaston Francucci, “Mechanical properties of flax fiber reinforced composites at different relative humidities: experimental, geometric and displacement potential function approaches”, Polymer Composites, vol. 41, pp. 4963-4973 (2020). (IF = 3.531), Q1, DOI: 10.1002/pc.25766

[6]. Abdul Moudood, Anisur Rahman, Andreas Öchsner and Gaston Francucci, “Effects of different relative humidities on flax fibres prior to manufacturing their composites based on the shear response”, Advances in Materials Science and Engineering, vol. 2020, pp. 1-7 (2020). (IF = 2.092), Q2, DOI: 10.1155/2020/4785970.

[7]. Moudood, M., Sabur, A., Lutfi, A., Ali, M. and Jaafar, I. (2014). Investigation of the machinability of non-conductive ZrO2 with different tool electrodes in EDM. International Journal of Automotive and Mechanical Engineering, 10, 1866-1876. DOI: http://dx.doi.org/10.15282/ijame.10.2014.4.0155.

[8]. Sabur, A., Ali, M., Maleque, M. and Moudood, M. (2014). Micro-EDM for micro-channel fabrication on nonconductive zro2 ceramic. International Journal of Automotive and Mechanical Engineering, 10, 1841-1851. DOI: http://dx.doi.org/10.15282/ijame.10.2014.2.0153.

[9]. Ali, M. Y., Moudood, M. A., Maleque, M. A., Hazza, M. and Adesta, E. Y. T. (2017). Electro-discharge machining of alumina: Investigation of material removal rate and surface roughness. Journal of Mechanical Engineering and Sciences, 11 (4), 3015-3026. DOI: https://doi.org/10.15282/jmes.11.4.2017.5.0271.

[10]. Conference proceedings: Moudood, M. A., Sabur, A., Ali, M. Y., & Jaafar, I. H. (2014). Effect of Peak Current on Material Removal Rate for Electrical Discharge Machining of Non-Conductive Al2O3 Ceramic. Advanced Materials Research, 845, 730-734. DOI: 10.4028/ www.scientific.net /AMR.845.730

[11]. Moudood, M. A., Sabur, A, Ali, M. Y., & Jaafar, I. H. (2015). Effect of Gap voltage and Pulse-On time on Material Removal Rate for Electrical Discharge Machining of Al2O3. Advanced Materials Research, 1115, 3-6.DOI:10.4028/www.scientific.net/AMR.1115.3

[12]. Sabur, A., Moudood, A., Ali, M. Y., & Maleque, M. A. (2014). Effect of Micro-EDM Parameters on Material Removal Rate of Nonconductive ZrO2 Ceramic. Applied Mechanics and Materials, 465, 1329-1333. DOI:10.4028/www.scientific.net/AMM.465-466.1329

[13]. Sabur, A., Moudood, A., Ali, M. Y., & Maleque, M. A. (2013). Investigation of surface roughness in micro-electro discharge machining of nonconductive ZrO2 for MEMS application. In IOP Conference Series: Materials Science and Engineering (Vol. 53, No. 1, PP. 012090). IOP Publishing. DOI:10.1088/1757-899X/53/1/012090

[14]. Sabur, A., Mehdi, S. M., Ali, M. Y., Maleque, M. A., Moudood, A. (2014). Investigation of Surface Roughness in Micro-EDM of Nonconductive ZrO2 Ceramic with Powder Mixed Dielectric Fluid. Advanced Materials Research, 1115, 16-19. DOI:10.4028/www.scientific.net/AMR.1115.16

[15]. Abdul Moudood, Anisur Rahman and Gaston Francucci, “Effects of water absorption on flax fibre reinforced composites based on accelerated tests,” The 9th International Conference on Key Engineering Materials (ICKEM 2019), 29 March-1 April 2019, Oxford, The UK.

[16]. Poster Presentation: An Optimum Parametric Model Using Response Surface Methodology for EDM of Al2O3. Kulliyyah of Engineering Research and Innovation Exhibition (KERIE) 2014, December 10, 2014, IIUM, Malaysia.

[17]. Empirical Modelling in Electrical Discharge Machining of Non-conductive Al2O3 Ceramic. Kulliyyah of Engineering Research and Innovation Exhibition (KERIE) 2013, June 13, 2013, IIUM, Malaysia.

Skills

Teaching
0
Research
0
Communication
0
Management
0